Ambu aScope 3 Slim 3.8/1.2, Instructions For Use Manual

Page: 7 / 26

No. Part Function Material
1 Handle Suitable for left and right hand MABS
2 Control lever Moves the distal tip up or down in
a single plane POM
3 Working
channel port Allows for instillation of fluids and insertion of
endoscopic accessories
MABS +
Silicone
- Working
channel Can be used for instillation of fluids, suction
and insertion of endoscopic accessories PU
4 Suction
connector Allows for connection of suction tubing MABS
5 Suction
button Activates suction when pressed down MABS
6 Tube
connection Allows for fixation of tubes with standard
connector during procedure TPE alloy
7 Insertion cord Flexible airway insertion cord PU
8 Bending
section Manoeuvrable part PU
9 Distal end Contains the camera, light source (two LEDs),
as well as the working channel exit Epoxy
7-8-9 Insertion
portion The ensemble of insertion cord, bending
section and distal end See above
10 Connector on
aScope 4
Broncho cable Connects to blue socket on aView PVC
11 aScope 4
Broncho cable Transmits the image signal to aView PVC
12 Handle
protection Protects the suction connector during
transport and storage. Remove before use. PP
13 Protection
pipe Protects the insertion cord during transport
and storage. Remove before use. PP
14 Introducer To facilitate introduction of Luer Lock syringes
and soft endoscopic accessories through the
working channel PC
- Packaging Sterile barrier Cardboard,
Tyvek
Abbreviations: MABS (Methyl Acrylonitrile Butadiene Styrene), PU (Polyurethane),
TPE (Thermoplastic Elastomer), PP (polypropylene), PC (Polycarbonate), POM (Polyoxymethylen).
EN
7