Ambient Weather WS-7079 User Manual Download

Page: 28 / 49

Version 1.0

Page 28

Figure 32

5.14.1

Rain Units of Measure

Command

Mode

Settings

[RAIN] + 2
seconds

Enter Rain Settings
Rain Units of Measure

Press [

]

to change between mm → inch

[RAIN]

Exit Rain Settings

[RAIN]

+ 2 seconds means press and hold the

RAINFALL

button on the top of the display for two

seconds.

[RAIN]

means press but do not hold the

RAINFALL

button on the top of the display.

5.14.2

Rain Increments of Measure

Press (do not hold) the

RAIN

button to change increments of measure between

DAILY

- the total rainfall from midnight

HOURLY

- the total rainfall in the past hour

WEEKLY

- the total rainfall of the current week

MONTHLY

- the total rainfall of the current calendar month

TOTAL

– the total rainfall since the last reset.

RATE

– rainfall rate in the last 10 minutes x 6

5.14.3

Resetting Rain to Zero

In normal mode, press and hold the

HISTORY

button with 2 sec to reset the rainfall record.

5.15

Min / Max

Press (do not hold) the

MAX / MIN

button on the front of the display to review the following:

Command

Parameter

[MAX/MIN]

Outdoor MAX temperature

[MAX/MIN]

Outdoor MIN temperature

[MAX/MIN]

Outdoor MAX humidity

[MAX/MIN]

Outdoor MIN humidity

[MAX/MIN]

Indoor MAX temperature for the current channel
displayed

[MAX/MIN]

Indoor MIN temperature for the current channel
displayed

[MAX/MIN]

Indoor MAX humidity for the current channel
displayed

[MAX/MIN]

Indoor MIN humidity for the current channel
displayed

[MAX/MIN]

MAX Average Wind Speed

[MAX/MIN]

MAX Wind Gust

[MAX/MIN]

MAX Feels Like

[MAX/MIN]

MIN Feels Like

Summary of Contents for WS-7079

















































Search results

Summary of Contents for WS-7079

Reviews:

Related manuals for WS-7079

Brands by name

Popular brands

Ambient Weather WS-7079, User Manual

Search results

Summary of Contents for WS-7079

Reviews:

Related manuals for WS-7079

Brands by name

Popular brands