Ambiano MD 19416, User Manual

Page: 14 / 26

Prerequisite
14
Prerequisite
Due to the dimensions of the freezer bowl, a freezer compartment at
-18° C measuring at least 165 mm in height or a chest freezer is needed.
Setting up and initial use
− Thoroughly rinse the appliance parts that come into contact with food (freezer
bowl, paddle, cover) before fi rst use. Please note that the parts are not
dishwasher-safe.
− Before cleaning, remove the motor unit 3 from the cover 5 . First remove the
paddle 8 . ( Fig. C )
− Then press the release button 1 in and pull the motor unit upwards and off.
( Fig. D )
Using the ice cream maker
PLEASE NOTE!
Risk of damage!
If the freezer bowl is fi lled before the appliance is switched on, the
paddle can become jammed. There is a risk of damaging the mo-
tor. Please follow the safety advice below:
− Always switch on the appliance fi rst and only use the chute to
fi ll the appliance while it is running.
1. Pack the freezer bowl 9 into a suffi ciently large freezer bag.
2. Place the freezer bowl upright in the freezer compartment.
At a temperature of -18° C the cooling process takes around 12 hours. If the tempera-
ture in the freezer is higher, the cooling process can take up to 24 hours.
The double-walled freezer bowl contains coolant. Put the freezer bowl
back into the freezer if you can hear liquid moving around when you move
the bowl. If you do not hear anything, the freezer bowl is suffi ciently
pre-chilled.
3. Mix the ingredients for the desired type of ice cream according to the recipe (see
Chapter “Recipe suggestions” on page 16) in a seperate bowl and place the
mixture in the refrigerator for about 4 hours.