AFTER SALES SUPPORT
MODEL: AP170342 PRODUCT CODE: 57483 05/2017
1300 663 907
AUS
10
.
1.
Place the stand mixer on a level, stable surface. Ensure that the speed control dial is
in the OFF position.
2.
Plug the power cord into a mains outlet.
3.
Rotate the tilt head release lever clockwise and tilt the mixer head upwards until it
clicks securely into place. [shown Fig. 1]
4.
Place the mixing bowl into its holding area on the base of the mixer and turn it
clockwise until it is correctly and securely locked in place. [shown Fig. 2]
5.
Attach the required mixing tool by inserting it onto the shaft on the mixer head,
making sure to pass the lug on the shaft through the slot on the mixing tool.
Push the mixing tool up and turn it anticlockwise for a quarter turn until the lug is
positioned in the recess provided on the mixing attachment. [shown Fig. 3]
Assembly
6.
Rotate the tilt head release lever clockwise and carefully lower the mixer head into
the bowl. Push firmly until it locks securely into place. [shown Fig. 4]
7.
To attach the splash guard, slide the guard in between the top of the bowl and the
bottom of the mixer head ensuring the guard aligns to the outer edge of the bowl.
You can rotate the opening to face in your preferred direction. [shown Fig. 5]
8.
Attach the easy pour attachment by aligning the slots with the splash guard opening
and locking it in into place. [shown Fig. 6]
NOTE: The appliance will not switch on unless the mixer head is properly lowered and
securely locked into place.
Fig. 1
Fig. 4
Fig. 2
Fig. 5
Fig. 3
Fig. 6
