Amberg Technologies AG Tunnel 2.0 - Tunnelscan User Manual Download Page 58

Page: 58 / 68

Analysis and reporting

User manual

Page 58 of 68

The elements of the High resolution image analyses editor are identical to the ones of the

Line scan analysis type. Please see

Section 4.1.2, “

Analysis editor

” on page 28

for more

information.
The

3D tab

and the

Profile view

are not displayed.

Figure 49. Analysis editor High resolution image analyses

4.5.3 Analysis settings

The

Analysis settings dialog

can be opened by clicking on the

Settings

button in the toolbar

or from the context menu. Analysis settings are saved for each analysis separately. To preview

your settings without leaving the settings dialogue, use the

Apply

button at the bottom right.

The settings of this analysis type are mostly identical to the ones of the Line scan anal-

ysis type. Therefore, this chapter only lists the differences. Please see

Section 4.1.3,

“

Analysis settings

” on page 30

for common settings.

4.5.3.1 Processing

Use resolution and filters to adjust the data source to your needs.

Summary of Contents for Tunnel 2.0 - Tunnelscan





































































Search results

Summary of Contents for Tunnel 2.0 - Tunnelscan

Reviews:

Related manuals for Tunnel 2.0 - Tunnelscan

Brands by name

Popular brands

Amberg Technologies AG Tunnel 2.0 - Tunnelscan, User Manual

Search results

Summary of Contents for Tunnel 2.0 - Tunnelscan

Reviews:

Related manuals for Tunnel 2.0 - Tunnelscan

Brands by name

Popular brands