Amberg Technologies AG Tunnel 2.0 - Tunnelscan User Manual Download Page 36

Page: 36 / 68

Analysis and reporting

User manual

Page 36 of 68

■

Steps

: Displays the color from / to a defined deviation values with hard board-

ers between the colours.

■

Continues

: Displays the color from defined deviation values with smooth tran-

sition between the colours.

Use predefined

A predefined color scale for the deviation values can be loaded and ex-

ported form/to a file from other Amberg Tunnel projects.

Transparency

Adjust the transparency contrast of the displayed deviation values in the

analyses.

Color ruler

Select the color ruler of the report that should be used.

■

True scale

: The created color ruler on the report displays the differ-

ent deviation values and colours corresponding to the values between

maximum and minimum values of the color scale.

■

Regular intervals

: The created color ruler on the report displays the

different deviation values and colors in regular intervals.

Preview

Displays the defined color ruler for the report.

Filtered Areas

You can define colors for filtered areas. Data source filters are the that can

be found under settings in the menu

Filter

. Define the background color.

4.1.4 Reporting

Convert the enhanced measured point cloud data and the derived computations of the analy-

sis into reports. Basically, two types of reports are available:

Tabular reports

and

Graphical

reports

. Select the report type that you want to include in your report.

4.1.4.1 Tabular reports

A tabular report of the analysed point cloud can be generated using the

Tabular report

button

in the toolbar or from the context menu. A dialog is shown to select the report to be generated.

Additional a stationing range or the block definition of the reference construction stage can be

used to present the reported values in an optimal way. The following reports are available:

Measured volume

Generates a tabular report containing the measured areas

and the calculated volumes of the analysed point cloud.

Under-/overprofile volume

Generates a tabular report containing the measured, refer-

ence, overprofile and underprofile area as well as the cal-

culated volumes of the analysed point cloud.

4.1.4.2 Graphical reports

A graphical report of the analysed point cloud can be generated using the

Graphical report

button in the toolbar or from the context menu. A dialog is shown to select the stationing range,

derolement and scale of the report.

Stationing range

Input the start and end stationing off the report that should be printed.

Derolement range

Define the range along the theoretical model (profile) of the reference

construction stage which should be used. The zero point for the derole-

ment is the highest point of the theoretical tunnel model.

Scale

Modify the scale of the analysed point cloud picture in the printed re-

port.

Summary of Contents for Tunnel 2.0 - Tunnelscan





































































Search results

Summary of Contents for Tunnel 2.0 - Tunnelscan

Reviews:

Related manuals for Tunnel 2.0 - Tunnelscan

Brands by name

Popular brands

Amberg Technologies AG Tunnel 2.0 - Tunnelscan, User Manual

Search results

Summary of Contents for Tunnel 2.0 - Tunnelscan

Reviews:

Related manuals for Tunnel 2.0 - Tunnelscan

Brands by name

Popular brands