Amazone TSE 3000, Operating Manual

Page: 77 / 98

1. Raise the implement.
2.
To check the distance of the depth control wheel
scraper
1
,
rotate the wheel 2 .
3.
If the distance is too big,
loosen the nut 3 .
4. Adjust the depth control wheel scraper 1 .
5. Tighten the nut.
6.
To check the distance,
Rotate the wheel again.
or
If the depth control wheel scraper cannot be
readjusted any further,
see "Replacing the press roller scraper" .
3
3mm
2
1
CMS-I-00003180
9.1.6 Replacing the TwinTeC depth control wheel scraper
INTERVAL
as required
1. Raise the implement.
2. Remove the nut 3 and washer.
3. Replace the depth control wheel scraper 1 .
4. Install the washer and nut 3 .
5.
To check the distance,
rotate the wheel
2
.
3
3mm
2
1
CMS-I-00003180
CMS-T-00004988-A.1
9 | Repairing the machine
Maintaining the machine
MG6860-EN-II | A.1 | 20.07.2020 73