1. Depressurise the hydraulic system between the
tractor and the implement using the tractor control
unit.
2. Clean the hydraulic plugs.
3. Couple the hydraulic hoses
1
to the hydraulic
sockets of the tractor according to the marking
2
.
The hydraulic plugs lock perceptibly.
4. Route the hydraulic hoses with sufficient freedom
of movement and without chafing points.
1
2
CMS-I-00001045
6.2.3 Coupling the power supply
1. Insert the plug
1
for the power supply.
2. Route the power supply cable with sufficient
freedom of movement and without chafing or
pinching points.
3. Check the lighting on the implement for proper
function.
1
CMS-I-00001048
6.2.4 Coupling the ISOBUS supply
1. Insert the ISOBUS plug
1
.
2. Route the ISOBUS cable with sufficient freedom
of movement and without chafing or pinching
points.
1
CMS-I-00001048
CMS-T-00001399-B.1
CMS-T-00003611-B.1
6 | Preparing the machine
Coupling the implement
MG6860-EN-II | A.1 | 20.07.2020
43
Summary of Contents for TSE 3000
Page 1: ...Operating manual MG6860 EN II A 1 20 07 2020 seeding rail TSE 3000 Original operating manual...
Page 96: ......
Page 97: ......
