Amazone KG 6002-2, Original Operating Manual

Page: 67 / 118

Pegging position Working depth
Higher
+
Deep tillage
Lower
-
Shallow tillage
14. Rest the adjusting rod
1
in the support
2
.
15. Insert the depth setting pin at the desired
position.
CMS-I-00002966
The edges of the depth setting pins have different
distances. A finer graduation of the working depth is
achieved by turning the depth setting pin. The number
1
on the depth setting pin provides information on
the setting.
Number on the depth
setting pin
Working depth
1 Very shallow tillage
2 Somewhat deeper tillage
3 Even deeper tillage
4 Very deep tillage
16. Insert the depth setting pin
3
at the desired
position.
17. Secure the depth setting pin with the linch pin.
18. Make the same setting for the opposite side of the
implement.
19.
To adjust the setting of the levelling board,
see section "Adjusting the working depth of the
levelling board".
20.
To adjust the setting of the side guide plates,
see section "Adjusting the working depth of the
side guide plates".
CMS-I-00002965
6 | Preparing the machine
Preparing the implement for operation
MG6750-EN-II | C.1 | 21.07.2021 61