1.
Raise the implement.
2.
Loosen and remove the nut
4
.
3.
Remove the shear bolt
2
.
4.
Release the linch pin
5
.
5.
Remove the locking pin
1
.
The maximum working depth is 150 mm.
6.
Move the wheel mark eradicator
3
to the
desired position.
7.
Secure the wheel mark eradicator with the locking
pin.
8.
Secure the locking pin with the linch pin.
9.
Install the shear bolt.
10. Install the nut and tighten it.
CMS-I-00004508
6.7.10.2 Adjusting the wheel mark eradicator to the track width
REQUIREMENTS
The implement is raised
The tractor and implement are secured
1.
Release the clamp connection
1
.
2.
Move the wheel mark eradicator bracket
2
to
the desired position.
3.
Tighten the clamp connection.
CMS-I-00004506
CMS-T-00006299-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6750-EN-II | C.1 | 21.07.2021
69
Summary of Contents for KG 6002-2
Page 1: ...Original operating manual Rotary cultivator KG 6002 2 SmartLearning www amazone de...
Page 6: ......
Page 117: ......
