Adjustments
Cenius 4002-2T BAG0100.2 04.13
67
(1) Spindle
(2) Tools for setting the spindle length (in parking position).
(3) Lock nut
The working depth of the tines is set by adjusting the spindle length
using the tool.
1. Slacken lock nut.
2. Set the spindle length.
Spindle
shortened
Increase the working depth.
Spindle
lengthened
Reduces the working depth.
3. Re-tighten the lock nut.
4. After use, move the tool back into the parking position and se-
cure using locking pins.
Adjust both spindles to the same length.
If the spindle should rotate when tightening the lock nut, lift the
machine and load the spindle using the roller.
8.1.2
Hydraulic depth adjustment
Fig. 42
(1) Hydraulic depth adjustment
(2) Scale with pointer that displays the working depth.
The values on the scale do not specify the working depth set in cm.
Setting the working depth is carried out using the tractor controller 2
(hose marking, green).
