Use of the machine
96
Catros BAG0210.5 07.21
10.2
Use on the field
Implement with tensioned crosspiece:
Work with the tractor lower links locked to the sides.
•
It is forbidden to drive in reverse when the implement is in
working position!
•
Put the
yellow
tractor control unit into float position.
ContourFrame
•
Put the
blue
tractor control unit into float position.
→
The pre-load pressure acts on the sections
•
The drawbar cylinder is resting on the spacer elements.
The sections pressure can drop on long fields.
→
Actuate the
yellow
tractor control unit to raise the sections pres-
sure back up to the set value.
No ContourFrame
•
The drawbar cylinder must be able to move freely; it must not
rest on a surface in the end position.
10.2.1 Using the cutting roller
1. Align the implement horizontally.
If the implement is working too deep at the front, the cutting
roller can be damaged.
2. Open the stop tap of the preload device.
3. Actuate the beige tractor control unit.
→
Lower the cutting roller and build up preload tension.
4. Switch the beige tractor control unit to the float position.
