Adjustments
Catros BAG0210.5 07.21
87
8.4
Adjusting the preload pressure of the cutting roller
1.Actuate the beige tractor control unit and lock
it.
→
Lower the cutting roller and build up preload
tension.
2. Loosen the lock nut (2).
3. Adjust the preload pressure using the hex-
agon socket head screw (1).
→
Observe the pressure gauge.
4. Re-tighten the lock nut.
•
Factory setting:362 psi / 25 bar
•
Setting range: 362 – 508 psi / 25 – 35 bar
Maximum preload pressure:
870 psi / 60 bar
Higher preload pressure can result in dam-
age.
8.5
Working depth of the side elements
The raised side elements must be adjusted via 2
bolts in elongated slots.
1. Secure the tractor against unintentional
starting and unintentional rolling away.
2. Slightly loosen the bolts.
3. Raise or lower the side elements.
4. Retighten the screw unions.
