Adjustments
84
Catros BAG0210.5 07.21
8.2
Working depth of the discs
If the front and rear disc gangs work at
different depths, adjust a uniform work-
ing depth using the spindles.
Hydraulic working depth adjustment
The working depth is hydraulically adjusted using
the
green
tractor control unit
.
The values of the scale only indicate
the approximate working depth.
If a uniform working depth cannot be
adjusted, see page
98
.
Manual working depth adjustment
WARNING
Risk of falling off the implement
.
Do not climb onto the implement parts.
Set the working depth evenly using 2 spindles in the centre and 2
spindles in the outer area of the implement.
1. Actuate yellow tractor control unit.
→
Lift implement into headlands position.
2. Switch the yellow tractor control unit to float
position.
→
Lower the front part of the implement for
better accessibility.
3. Secure the tractor against unintentional
starting and unintentional rolling away.
4. Shorten spindle
→
Increases the working
depth.
Lengthen spindle
→
Reduces the working
depth.
Adjust the spindles to the same length.
