Amazone Catros XL 7003-2TX Operating Manual Download Page 55

Page: 55 / 124

Structure and function

Catros BAG0210.5 07.21

•

Tooth packer roller PW 600

→

Very well suited for medium and heavy

soils.

•

U-profile roller UW580

→

Very well suited for light soils.

→

Resistant to clogging and good load-

bearing capacity.

•

Double U-profile roller DUW580

→

Very well suited for light and medium soils.

→

Resistant to clogging and good load-

bearing capacity.

•

Disc roller DW600

→

Very well suited for light, medium and heavy

soils.

•

Provides very good crumbling.

→

Resistant to clogging and sticking, offers a

good load-bearing capacity.

•

Double-Disc-roller DDW

→

Very well suited for light, medium and heavy

soils.

→

Resistant to clogging and sticking, offers a

good load-bearing capacity.

Summary of Contents for Catros XL 7003-2TX





























































































































Search results

Summary of Contents for Catros XL 7003-2TX

Reviews:

Brands by name

Popular brands

Amazone Catros XL 7003-2TX, Operating Manual

Search results

Summary of Contents for Catros XL 7003-2TX

Reviews:

Brands by name

Popular brands