Loading and unloading
3
Loading and unloading
After unloading:
Move the wheels from transport
position to operating position.
1. Fold out the machine.
2. Raise the chassis slightly to that
the wheels are clear of the
ground.
3. Rotate both wheels and tighten
the wheel nuts to 270 Nm.
Fig. 4
See page 105!
Loading using a lifting crane
WARNING
Risk of crushing due to accidental falling of a machine attached
to a load carrier during loading and unloading!
•
Only attach your lifting gear to/at the designated points.
•
Never remain in or enter the area below a raised, unsecured
load.
The minimum tensile strength of each lifting belt must be 200 kg!
The machine has 5 attachment points for lifting
equipment.
Fig. 5
Catros BAG0155.4 05.19
29
Summary of Contents for Catros 4002-2TS
Page 115: ...Cleaning maintenance and repairs Catros BAG0155 4 05 19 115...
Page 116: ......
