Adjustments
The work pattern must be checked by viewing
the cultivation horizon behind the machine:
(1) Cutting edge 1st disc row
(2) Cutting edge 2nd disc row
•
Fig. 42:
Correct setting of disc rows.
•
Fig. 43
:
Adjust 1st disc row to right and check again.
•
Fig. 44
:
The cutting edge of the 2nd disc row is not
visible and follows the 1st disc row. Adjust
1st disc row to left.
Fig. 53
Fig. 54
Fig. 55
8.4
Working depth of the outside discs
The raised outside discs at the front right and
rear left must be adjusted.
Use the bearing pin and hub as handle.
1. Secure the tractor against unintentional
starting and unintentional rolling away.
2. Release screw unions (Fig. 45/1).
3. Adjust the side discs in the slot so that no
dam formation is caused during use.
4. Retighten the screw unions.
Fig. 56
82
Catros BAG0155.4 05.19
Summary of Contents for Catros 4002-2TS
Page 115: ...Cleaning maintenance and repairs Catros BAG0155 4 05 19 115...
Page 116: ......