NITID N26P_N12P_N15P
Sep 2018
5
Amate Audio
Fig. 3.
Full-range parallel stereo
configuration
2.2.3.
Passive
configuration
with
subwoofer
There will be times when you will be
interested in reinforcing your NITID Systems
with subwoofer units, in passive mode. In
this case only one amplifier will be used for
the whole system.
Connect one of the outputs of the amplifier
to the subwoofer through a wire. Then,
make a bridge from the link Speakon
connector of the subwoofer to its respective
mid-high top unit, always respecting the
correct polarity between both systems. Do
the same with the other channel.
It is also correct, if the installation requires
so, to make the connection in the opposite
way, that is, from the amplifier to the top
cabinet and then to the subwoofer.
Fig. 4.
Passive configuration with subwoofer
