NITID N26P_N12P_N15P
Sep 2018
7
Amate Audio
In order to allow a bridge connection between cabinets, each one of them
has been provided with two Speakon connectors that allow the Input /
Output function indistinctly. Terminal Pins +1/-1 must be always used,
disregarding the +2/-2 which are not internally connected.
3. MOUNTING AND PLACEMENT
For a proper installation of the acoustic cabinet systems, it is strongly recommended
to carefully read the following advices.
3.1.
Placement
When possible, cabinets should be located in a high position, slightly inclined to the
audience. If the loudspeakers are located too low, the listeners at the end of the
room will not hear a good sound quality.
Fig. 7
. Flying placement
3.2.
Use with subwoofer or tripod
All models are equipped with a 35 mm socket for
mounting the speaker on a subwoofer or tripod.
Be careful not to use this system on non-flat
surfaces as it may become unstable.
