NITID N26P_N12P_N15P
Sep 2018
4
Amate Audio
Fig. 1.
NITID (passive) connectors
It is strongly recommended to use a two-conductor high quality wire, non-
shielded and two-coloured. We recommend using a minimum section of 4
mm
2
for each conductor. Avoid long wire distances as they induce to
important power and quality losses.
2.2.
Configurations
2.2.1. Full-range stereo configuration
Connect each output of the amplifier
LEFT/RIGHT to each cabinet using two
independent wires.
Fig. 2.
Full-range stereo configuration
2.2.2. Full-Range parallel stereo configuration
Connect the amplifier's output to the Speakon’s input of the first cabinet, always
respecting the polarity positive +1, negative -1. Then, make a bridge from the first
cabinet to the second one.
A
A
