NITID N26_N36_N46
Oct 2017
8
Amate Audio
Fig. 2.
Parallel connection for N26, N36 and N46 cabinets (signal and mains)
Do not connect NITID series units using PowerCon without earth.
Do not connect more than ten units using the AC output link connector.
2.2.2. Parallel connection with other equipment
You can connect other NITID loudspeakers or subwoofers in parallel with N26,
N36 or N46. Please, follow the same parameters as explained in
Fig. 2.
3. MOUNTING AND PLACEMENT
For a proper installation of the acoustic cabinet systems, it is strongly recommended
to carefully read the following advices.
3.1.
Placement
When possible, cabinets should be
located in a high position, slightly
inclined to the audience. If the
loudspeakers are located too low,
the listeners at the end of the room
will not hear a good sound quality.
Fig. 3
. Flying placement
