NITID N26_N36_N46
Oct 2017
5
Amate Audio
XOVER
HPF 100Hz
2. CONNECTIONS
2.1.
Connection Panel
The power and audio connections are located on the unique panel, shown in Fig. 1.
The different parts of the panel are explained in detail in the following sections of the
manual.
Control:
A) LCD
: Displays information about the system status. The main screen shows the
following information.
Current preset
Input Level
Output Level LF Channel
Output Level HF Channel
Amplifier temperature
ALC mode enabled/disabled
ECO mode enabled/disabled
Keypad locked/unlocked
B) KEYPAD
: Allows the user to perform basic operations on the DSP such as Preset
selection, audio settings and user preferences. There are three keys available:
MENU key: OK key: Circular key:
To enter the menu the keypad must be unlocked by pressing simultaneously the
MENU and OK keys.
The central circle of the circular key will light up in blue when this key is active.
C) PROTECTION LED:
This led lights up when the amplifier is in a protection
situation (such as temperature excess, overcurrent, or other situations that can
compromise the amplifier’s integrity). It will also light up when the amplifier is in
standby mode. This happens for a couple of seconds at start-up.
The Protection led will light off when the amplifier recovers from the abnormal
situation. Shall the Protection led keep up lighted on even after a system restart,
please contact an authorized service.
FLAT
