14
Engine Ignition Switch
This machine features a key switch ignition.
Start:
Turn the key all the way clockwise to engage the
engine starter motor. Once the engine starts release
the key.
NOTE:
Always start this machine with the bail throttle
in the idle or “slow” position.
Run:
This is the position of the key while the engine is
running.
Off:
Turn the key to the “OFF” position to stop the
engine from running.
NOTE:
For safety, always close the propane cylinder
valve to stop the engine and then turn the key switch
to the “OFF” position.
Bail Throttle
Do not try to start the machine with the bail throttle in
the operating position.
After the engine has started, with the pad off of the floor,
pull the bail throttle to the operating position. The clutch
will engage automatically and the engine will throttle to
the correct speed.
CAUTION!
DO NOT
pull the bail throttle with the
burnishing head lowered to the floor.
Release the bail and the clutch will automatically
disengage. The engine speed will return to idle.
Hour Meter / Tachometer
The hour meter / tachometer records the number
of hours the machine has been powered ON. The
hour meter reading is used to mark recommended
maintenance intervals. It also displays the engine
speed. This meter displays hours when the machine
is turned OFF and engine speed when the machine is
turned ON.
Summary of Contents for Pioneer Eclipse SAFR PE440BU
