Amano Pioneer Eclipse PE250AP, Operator'S Manual

Page: 4 / 20

4
WARNING: Read all safety warnings, instructions,
illustrations, and specifications provided with
this appliance. Failure to follow all instructions
listed below may result in electric shock, fire, and/
or serious injury.
This appliance is designed and
manufactured for indoor use. Amano Pioneer Eclipse
Corporation (APEC) does not recommend use of this
appliance in any environment other than an indoor
environment. This floor machine is designed and
manufactured for commercial use only.
WARNING:
To reduce the risk of fire, electric shock or
injury:
• Do not leave appliance when plugged in.
• Do not leave appliance connected to the electricity
supply when not in use.
• Do not leave the appliance unattended while running.
• Unplug from outlet before servicing.
• Use only as described in this manual. Use only
manufacturer’s recommended components and
attachments.
• Use only indoors. Do not use outdoors or expose to rain.
• Do not use with damaged cord or plug. If appliance is
not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, return it to an
authorized service center.
Safety Precautions
• Do no pull or carry by cord, use cord as a handle,
close door on cord, or pull cord around sharp edges or
corners. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Turn off all controls before unplugging.
• Do not attempt to service the unit while appliance is
plugged in.
• Appliance may cause a fire when operating near
flammable vapors or materials. Do not operate this
machine near flammable fluids, dust or vapors.
• Connect to a properly grounded outlet.
• Do not use with any solid state speed control device.
• This unit is thermally protected.
DANGER: To avoid injury, keep hands, feet, and loose
clothing away from all moving parts on the machine. Do not
operate the machine unless all guards are in place. Never
leave the machine unattended while connected to a power
source.