Amano Pioneer Eclipse PE250AP, Operator'S Manual

Page: 6 / 20

6
ALL RIGHTS RESERVED - AMANO
PIONEER ECLIPSE CORP.
This drawing and the included concepts are
the property of Amano Pioneer Eclipse Corp.
and is to be returned immediately upon
demand. The designs and concepts shown
hereon are confidential and are not to be
copied, divulged or submitted to others.
CHECKED
FINISH
TOLERANCES UNLESS
OTHERWISE SPECIFIED
FRACTION
2 PLACE DEC.
3 PLACE DEC.
ANGULAR
 1/16

.03
 .010
 1 
REV
DESCRIPTION
APPROVED
DRAWN
MATERIAL
PART OR ASSY. #
SCALE SHEET #
AMANO PIONEER ECLIPSE
NOTES:
1. ALL DIMENSIONS ARE IN INCHES (UNLESS OTHERWISE NOTED)
5/14/21
DAC
250AP COMPONENTS
A NTS1 OF 1
REVISION HISTORY
REV DESCRIPTION ECN # DRAWN CHECK APPROVED
A INITIAL ISSUE X
POWER CORD
INTERCONNECT CORD
GCFI RECEPTACLE
CIRCUIT BREAKER
POWER SWITCH
HEPA FILTER
PRE FILTER
UV-C BULB
LIGHT FILTER
Appliance Components
Appliance Preparation
Unpacking the Appliance
When the appliance is delivered, carefully inspect the
shipping carton and the machine for damage. Unpack
the machine with caution. If damage is evident, save the
shipping carton so that it can be inspected. Contact the
Amano Pioneer Eclipse Customer Service Department
or your authorized Amano Pioneer Eclipse Distributor.
Bulb Installation
WARNING: UV-C emitted from this product.
Avoid eye and skin exposure to unshielded product.
CAUTION: Do not operate device without filter and
cover securely attached
1. Make sure appliance is not plugged into a power
source.
2. Disconnect interconnect cord (Figure 1) from the
appliance’s cover.
3. Remove retaining screw (Figure 2) from the cover.
Note the orientation of the cover relative to the
appliance.
4. Remove cover and lay upside down.
Figure 1
Figure 2