This machine is manufactured for
commercial use only.
This machine is designed and manufactured for
commercial floor stripping only. Amano Pioneer
Eclipse does not recommend use of this machine in
any environment other than an indoor environment.
This machine is designed to strip most modern types
of flooring including composition tile, stone, marble,
terrazzo, concrete, and resilient floor covering. Even
though NFPA 11.13.2.3 says...”the use of floor
maintenance machines in buildings frequented by the
public, including the times when such buildings are
occupied by the public, shall require the approval of the
authority having jurisdiction.” Amano Pioneer Eclipse
suggests usage when occupancy of a given work area is
minimal.
These machines should not be used
l
In nursing homes, hospitals, day-care centers, etc.
that are occupied.
l
By unqualified or untrained personnel.
l
Unless properly maintained and adjusted.
l
On areas with obstructions such as thresholds, floor
outlet boxes, etc.
l
In areas where loose debris or other objects are
present.
l
In rooms and areas without proper ventilation
Operator Responsibility
The operator is responsible for performing the
recommended daily maintenance and checkups of
the machine to keep it in good working condition. The
operator must inform the service mechanic or supervisor
when recommended maintenance procedures are
required as described in the
“MAINTENANCE”
section
of this manual.
l
Read this manual carefully before operating this
machine.
l
FOR SAFETY:
DO NOT
operate machine before
reading and understanding the operation manual.
l
Check the machine for shipping damage.
Keep your machine regularly maintained by following
the maintenance information in this manual. Order parts
and supplies only from an Authorized Amano Pioneer
Eclipse Distributor. Use the parts illustration section of
your manual when ordering parts.
During and after operation, perform the recommended
daily and hourly procedures outlined in the Maintenance
Chart.
Refueling and Storage of Fuel Cylinders
This machine uses a 20lb (9.1kg) capacity aluminum or
steel cylinder, which meets the DOT 4E240 standards.
These cylinders are also listed by UL. In addition, the
steel cylinder meets European TPED specifications
and is CE compliant. Filling should be done ONLY
by a qualified propane dealer. FILL THROUGH THE
SERVICE VALVE ONLY. A properly filled cylinder should
not exceed 80% of the rated capapcity.
DO NOT
attempt cylinder repair. Return the cylinder to
your propane dealer if repair is necessary. Please note
that DOT regulations prohibit shipping of cylinders after
the cylinder has been filled with propane. When not in
use, cylinders should always be stored outside in an
upright position in a secure, tamper-proof, steel mesh
storage cabinet. The cabinet may be located next to
the building, but with at least five feet (1.5 m) of space
between the cabinet and the nearest building opening
(door or window).
The cylinder to be used on this machine is a vapor
withdraw cylinder.
A liquid withdraw
cylinder is not
to be used with this machine.
The use of a liquid
withdraw cylinder on a vapor withdraw system could
freeze the regulator and create a fire hazard. The
National Fire Protection Association (NFPA) Standard
for Storage and Handling of LP Gas is the appropriate
authority for safe propane use. A copy of this publication
is available through the National Fire Protection
Association (1-800-344-3555) or www.NFPA.org.
9
Summary of Contents for Pioneer Eclipse 440ST
