background image

52

TO QUALIFY FOR THIS WARRANTY

(1)  Machine must be registered at the time of purchase on a form 

provided by Amano Pioneer Eclipse Corporation. Your Amano 

Pioneer Eclipse Distributor is responsible for the registration 

of your machine. Please cooperate with your Distributor in 

supplying necessary information on the card.

(2)  The machine must have been purchased from Amano Pioneer 

Eclipse Corporation or an authorized Amano Pioneer Eclipse 

Distributor.

(3)  This warranty extends to the original purchaser only and is not 

transferable to subsequent owners.

TIME PERIODS

(1)  Propane engine warranted by engine manufacturer for (2) 

years.

(2)  Battery warranted by battery manufacturer for (1) year.
(3)  Valve train warranted by Amano Pioneer Eclipse for (1) year.
(4)  ONE (1) YEAR WARRANTY - For the PE440ST. 

Warranted to be free from defects in material and workmanship 

for a period of one (1) year from the date of purchase by the 

original owners. (See Exclusions)

EXCLUSIONS (Not Covered by Warranty)

(1)  Parts that fail through normal wear by reason of their 

characteristics (cords, pads, belts, wheels, pad holder, or other 

consumable parts).

(2)  This warranty does not extend to parts affected by misuse, 

neglect, abuse or improper maintenance. All defective parts 

must be returned to the distributor for credit.

THE OBLIGATION OF AMANO PIONEER ECLIPSE 

CORPORATION

(1)  The obligation of Amano Pioneer Eclipse under this warranty 

is limited to repairing or replacing, at its option, any part which 

is proven to be defective in material or workmanship under 

normal use for the applicable period stated above.

(2)  Warranty repairs will be made by your Amano Pioneer Eclipse 

Distributor without charge for parts and labor. They will be 

compensated with a warranty labor rate of $45.00 per hour, for 

the first year of ownership.

(3)  Parts repaired or replaced under this warranty are warranted 

only during the balance of the original warranty period. All 

defective parts replaced under these warranties become the 

property of Amano Pioneer Eclipse.

WARRANTY SERVICE

To obtain warranty service, take your machine and proof of 

purchase to any authorized Amano Pioneer Eclipse Distributor.  

Amano Pioneer Eclipse will not reimburse expenses for service 

calls or travel. For the Distributor in your area, call Amano Pioneer 

Eclipse Customer Service Department at 800-367-3550 or 336-372-

8080. If you are dissatisfied with the service that you receive, call 

or write Amano Pioneer Eclipse Customer Service Department for 

further assistance.

INSTRUCTIONS AND CONDITIONS FOR WARRANTY 

REIMBURSEMENT

Order replacement part: Orders will be processed and charged, 

as normal procedure.

Call Amano Pioneer Eclipse for R/A number.

You will need the Engine Serial Number, Machine Serial 

Number, and the Machine Model Number.

Parts must be returned, accompanied with the R/A number to 

be eligible for warranty credit.

All Warranty Parts will be shipped prepaid UPS Ground, any 

other method will be at the recipients expense.

Freight on any Warranty Part after 30 days must be paid for by 

the Purchaser.

Warranty labor rate is $45.00 per hour.

Credit will be issued upon completion of the above steps, at the 

above rates.

DISCLAIMER OF CONSEQUENTIAL

AMANO PIONEER ECLIPSE DISCLAIMS ANY RESPONSIBILITY 

FOR LOSS OF USER TIME OF THE AMANO PIONEER ECLIPSE 

MACHINE OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL 

DAMAGE EXCEPT AS STATED IN THE WARRANTY 

APPLICABLE TO EACH MACHINE. EXCEPT AS STATED IN 

SUCH WARRANTIES, THE COMPANY DOES NOT OTHERWISE 

WARRANT ANY MACHINE AND NO WARRANTY, EXPRESS, 

IMPLIED OR STATUTORY IS MADE BY THE COMPANY.

Copyright 2016 Amano Pioneer Eclipse Corporation

Limited Warranty

PE440ST Propane Burnisher

LT059300_G; 020116

Summary of Contents for Pioneer Eclipse 440ST

























































Reviews: