© Copyright 2015 Amano McGann, Inc.
OPUS2000_USOperations_03052015
24
OPUS-2000 Operations Manual
Note: The volume switch setting uses volume
One
in between the
Start
and
End
. Volume
Two
is used for all times outside of the
Start
/
End
range. Please see section
to adjust the voice announcement
volumes.
6.1.6 Entering Staff Passwords
A staff member can be added to the Terminal with a function level and password.
Press
7
from the
Management Operation
screen
to enter the
Password Setting
menu.
[Fig. 6.1F] Enter a new management staff member
Add a new staff member by pressing the number on the remote designated by
the number beside the
Stf.No.
Once in the second
Password Setting
menu,
press
1
to add a password for the staff member. Enter a password and press
Chan Down
to accept the change and move to the function level. Enter a
function level for the user and press
Chan Down
to accept the change.
To continue adding users, press
Vol Up
. To exit the
Password Setting
menu,
press
Power
until back to the
Management Operation
menu.
