© Copyright 2015 Amano McGann, Inc.
OPUS2000_USOperations_03052015
16
OPUS-2000 Operations Manual
2.5 Credit Card In (OPUS-2700 Only)
This procedure describes using the Entry Terminal as a “Credit Card In” device.
1. When the “A” loop has sensed a vehicle, the unit will arm and the transaction
screen is displayed.
2. Insert the credit card into the credit card reader so that the credit card
magnetic stripe is downwards and to the right.
3. Pull the credit card out.
4. The gate is vended. The gate is closed once the “C” loop senses a vehicle
and the Entry Terminal is returned to the idle screen.
A
CCESSING
T
HE
T
ERMINAL
3.1 Opening the Side Terminal Door
1. Insert the Terminal door key into the right-side door.
2. Push the key inwards and simultaneously rotate the key 90 degrees
clockwise until the key hits the stopping point.
3. Pull the door open.
[Fig. 3.1A] Insert and rotate the key
[Fig. 3.1B] Pull the door to open
