![background image](http://html1.mh-extra.com/html/amano/agp-2000-series/agp-2000-series_installation-and-operation-manual_2918178028.webp)
Intercom Wiring
If you are using the AGP-2000 internal intercom, follow the wiring diagram below.
Complete the Installation
After wiring connections and ticket loading are completed, proceed as follows:
1. Hang the vault box next to the vault reset switch underneath the RWPV™
(Read, Write, Print, Vault) mechanism.
2. Refer to the
AGP-2000 Programming Manual
(ATD-107500) to program and
test the unit.
3. After programming and testing the AGP-2000, close and latch the top cover,
then close and lock the pedestal door.
4. Remove the protective covering from the front panel.
3 - 14
AGP-2000 Installation and Operations / INSTALLATION
Figure 3-15 AGP-2000 Intercom Wiring Diagram
Summary of Contents for AGP-2000 Series
