Amanda Amanda@Work.Place Version 3.xx, Installer'S Manual

Page: 31 / 206

Chapter 5: Defining Tone Patterns 23
To define the Reorder/Fast Busy/Error tone pattern:
1. Type a telephone number for an invalid extension in the Phone No. field. This
extension number must return the reorder tone. For example, you might use 777 or
888. Test this tone from a single-line telephone before you run this test.
2. Type 3 in the Verification Count field. This is the number of times you want to run the
test.
3. Type 10 in the Minimum Cycles field. This is the number of rings AccuCall Plus will
listen to before completing the test cycle.
4. Select Full (the default) as the value for the Frequency Range field.
The possible values are:
Full (300 Hz to 1700 Hz)
High (800 Hz to 1700 Hz)
This is the range of frequencies that AccuCall Plus listens to.
5. The Frequencies Detected Window displays the frequencies detected by AccuCall
Plus to characterize the tone.
6. The Cadence Detected Window displays the cadence that AccuCall Plus detected to
characterize the tone. (This is displayed as a horizontal bar graph.)
7. Press F9 to begin the test.
8. After AccuCall Plus has determined the system tone pattern, you can customize the
tone description using the Edit Tones box:
Name: Example: Panasonic Reorder Tone
Type: Busy if normal reorder
Terminating: YES
Cadence: NO
Frequency1: Determined by test
Frequency2: Determined by test
PCPM Code: 7 (always for busy tones)
Quick Count: None
On Time: Determined by test
On Max Variation: Determined by test
On Min Variation: Determined by test
Off Time: Determined by test
Off Max Variation: Determined by test
Off Min Variation: Determined by test
9. Save the tone by pressing F8 (twice).
10. From the main screen, press F3 to go to the Filters screen. The Undefined Tone Fre-
quencies box on the right side of the screen lists any undefined frequencies that were
found by the test.