Amanda Amanda@Work.Place Version 3.xx, Installer'S Manual

Page: 178 / 206

170 Installing Amanda@Work.Place
range1
range2
range3
range4
If you have a range key (for example range1_key for range1 or range2_key for range2),
you can activate 10000 mailboxes. Ranges and range keys are used for third-party ap-
plications that program a range of mailboxes to perform certain functions using the To-
ken Programming Language. For more information, contact your Amanda Company
sales representative.
You set this option to the first number in the mailbox range. This number must be a mul-
tiple of 10000.
The default is 10000 for range1, 20000 for range2, 30000 for range3, and 40000 for
range4.
See also range1_key, range2_key, range3_key, and range4_key.
The defaults appear in install.cfg as:
set range1 10000
set range2 20000
set range3 30000
set range4 40000
range1_key
range2_key
range3_key
range4_key
If you buy a third-party application that was customized for Amanda using the Token
Programming Language, you import the mailboxes programmed for that application
with the import utility.
Then, to activate that application, you set one of these options to the activation key (or
range key) that allows Amanda to use those mailboxes. For more information, contact
your Amanda Company sales representative.
The default is 0, which means there is no key.
See also range1, range2, range3, and range4, the options that you set to the first of the
mailboxes that correspond to the range key.
The defaults appear in install.cfg as:
set range1_key 0
set range2_key 0
set range3_key 0
set range4_key 0
recall_delay Amount of time the voice board waits after an earth recall (used in place of a hookflash
on some telephone switching systems).
Number of hundredths of seconds. 0 tells Amanda to use the voice board's default (which
is 15 for Denmark or Holland and 50 elsewhere). Otherwise, the range is 1-6553.
The default appears in install.cfg as:
set recall_delay 0
record_beep Controls the beep that the user or caller hears as the system begins recording.
True or False. The default is True.
When True, the system beeps as it begins to record.
When False, the beep is not used. Be aware that, unless you have changed the prompt
set, the prompt the user hears as the system begins to record says “Begin recording at the
tone.”
The default appears in install.cfg as:
set record_beep true
General Options (Continued)
Configuration Option Description