Amanda Amanda@Work.Place Version 3.xx, Installer'S Manual

Page: 128 / 206

120 Installing Amanda@Work.Place
%T
System variable that contains the current connect time, the number of seconds that the
current port/call has been active. Each port has its own %T.
Examples:
P(%
T,N)
causes Amanda to say the amount of connect time as a number. See the P() command
for more information.
T(file,phone_no
[,tokens])
Command that sends faxes to either a specified telephone number or to a connected call.
Before using this command, be sure at least one fax modem is installed and configured
on Amanda.
Before using this command, make sure the configuration settings for the physical serial
port have been defined.
file The file name of the fax you wish to transmit. It can be any valid DOS file name. Use
the complete path to the file unless the file is in C:\AMANDA.
phone_no The telephone number (or a variable containing that number) for the fax device that ac-
cepts the transmission. Use the empty string to make Amanda wait for a call to ring into
the fax port.
tokens Optional. A string or variable that defines the actions Amanda takes to connect the call
to the fax port. For more information, please see the example for the J() command.
This command is used only in Extension fields.
Examples:
T(C:/FAXES/NEWINFO.FAX,%G6)
allows the user to request a fax and have the supplier of that fax send it to the provided
telephone number. This is commonly called a “two-call fax back”. NEWINFO.FAX is
the name of the file, and %G6 contains the fax telephone number.
T(C:/FAXES/NEWINFO.FAX,"",%S5)
allows the user to request a fax and have it sent as part of the current call. This is com-
monly called a “one-call fax on demand”. NEWINFO.FAX is the name of the file, and
%S5 provides the tokens that connect the call to the FAX port.
Failure: Fax modem not configured properly
Physical port not available
Logical port not configured properly
%U
System variable that contains the current mailbox number. Each port has its own %U.
See also %P.
U-ext_no Command that performs partially supervised transfers. Amanda does not transfer the call
if she detects a busy signal. To use the U token, the setting for Maximum Rings for the
mailbox must be set to 1.
ext_no Series of DTMF digits that indicate an extension number.
This command is used only in Extension fields.
Example:
U-144
causes Amanda to call extension 144 (if Amanda is processing a call). If the extension
rings, she transfers the call and hangs up. If the extension is busy, Amanda lets the caller
know that.
Failure: Does not fail
%V
System variable that contains the value of the Variable field in the current Notification
record. Each port has its own %V.
This token is used only in Notify Method fields.
Example:
If the only difference in a Notification template for mailboxes is the pager/beeper tele-
phone number that Amanda should call, %V can store that number.
9,%VW(3,P)%U*%M*%N#
causes Amanda to call the user and play the number of messages.
Alphabetical Token Reference (Continued)
Token Syntax Description