AMALGAMATED INSTRUMENT LD5-TMR, Operation And Instruction Manual, Page: 38 / 57

ConF RngE ConF dP
Measuring units
SECS 0
Seconds
SECS 01
Seconds and tenths of seconds
SECS 0.02
Seconds and hundredths of a second
SECS 0.003
Seconds and thousandths of a second
MM.SS 0
Minutes and seconds
MM.SS 0.1
Minutes and seconds and tenths of a second
MM.SS 0.02
Seconds and hundredths of a second
MM.SS 0.003
Seconds and thousandths of a second
MMM 0
Minutes
MMM 0.1
Minutes and tenths of a minute
MMM 0.02
Minutes and hundredths of a minute
MMM 0.003
Minutes and thousandths of a minute
hh.MM 0
Hours and minutes
hh.MM 0.1
Hours, minutes and tenths of a minute e.g.
1.33.7
hh.MM 0.02
Minutes and hundredths of a minute
hh.MM 0.003
Minutes and thousandths of a minute
hrS 0
Hours
hrS 0.1
Hours and tenths of an hour
hrS 0.02
Hours and hundredths of an hour
hrS 0.003
Hours and thousandths of an hour
dd.hh 0
Days and hours
dd.hh 0.1
Days, hours and tenths of an hour e.g.
3.15.2
dd.hh 0.02
Hours and hundredths of an hour
dd.hh 0.003
Hours and thousandths of an hour
dAYS 0
Days
dAYS 0.1
Days and tenths of a day
dAYS 0.02
Days and hundredths of a day
dAYS 0.003
Days and thousandths of a day
5.19 Preset
Section:
ConF
Display:
P.SEt
Range: Any display value
Default Value:
0.0
Default Access Level
2
Function number
4C78
This function displays and sets the preset value to be used when the reset mode is set to go to the preset value rather
than zero. Resetting to a preset value is most commonly used when down timing from a preset value.
5.20 Reset mode
Section:
ConF
Display:
R.SEt
Range:
RSt
,
P.SEt
Default Value:
RSt
Default Access Level
4
Function number
4C96
The reset terminal can be programmed to cause the display to reset to either zero (
RSt
) or the preset value set via
the
ConF P.SEt
function.
38 of 57 LD5TMRMAN-1.1-0