STEP 7: Power On and Controling
Place the Gimbal on the Stand and set to this
recommended position.
Connect the 3S 11.1V Battery to the Gimbal
and wait around 3-5 seconds for the
initialization.
Gimbal is now controllable by the Joystick.
Operation Modes could be refer to:
Operation Video
Beside then the Joystick, you are able to
control the Gimbal with the Mobile App too.
Prepare a 3 Channels Raido and Receiver if
you want to have wireless control of the
gimbal.
Connect the Wireless Control Cable to the
Receiver.
3-wires Cable: Control Lock and Follow Mode
(Connet to any 2-way or 3-way switch channel)
Blue wire: Control Yaw movement
Green wire: Control Pitch movement
16
Summary of Contents for Lensman-Pro 3 Axis
Page 23: ...End of Manual 23...
