STEP 6: Gimbal Balancing – Yaw Axis
Rotate the Gimbal Main Assembly as to
Parallel to the Handle Bar.
Tilt the Handle Unit to test if the Yaw Axis has
correct CG. The Camera should remain steady
if the CG is correct.
Adjust the Gimbal in this direction if the CG is
not correct.
Loosen these 2 Screws before the
adjustment.
Test again in the oppose position. Repeat the
previous steps if the CG is not correct.
(Be
Patient Here)
14
Summary of Contents for Lensman-Pro 3 Axis
Page 23: ...End of Manual 23...
