Supervisor 2000 Installation Instructions
Page 28
For Assistance: [email protected] +1 (909) 591-8431 PUD1601R6-1
Testing Lane Key Control (Optional)
Optional 3-position lane key control switches may be installed
on the turnstile to change passage modes for both directions of
travel. Two lane key control switches are installed per lane (one
for each side) at the base as shown in [Figure 27].
Turning the key to one of three positions overrides all existing
settings, placing the turnstile in Controlled Passage mode,
Free Passage mode or No Passage mode depending on the
orientation of the key. Refer to the Passage Modes section on
Page 24 for more information.
The keys to the lane key control switches are packaged in the
hardware box that was shipped with the turnstile.
Lane
Key
Control
Switch
Secured Side
Unsecured Side
Controlled
Passage
Mode
Free
Passage
Mode
No
Passage
Mode
NOTE
Lane
Key
Control
Switch
Lane Key Control Switch Locations
Figure 27
Lane Key Control Switch
Figure 28
