Supervisor 2000 Installation Instructions
Page 18
For Assistance: [email protected] +1 (909) 591-8431 PUD1601R6-1
Internal Card Reader Installation
Card readers used in connection with the site access control system
are not included with the SU2000. The SU2000 has sufficient room
on the end panel for the installation of small mullion or slim-style
proximity card readers. An access hole in the frame is provided for
routing card reader wiring.
Card readers may also be installed on an adjacent pedestal. Contact
Alvarado for information on obtaining pedestals
Card readers require separate power input – do not pull this power
from the SU2000 power supply.
1. Determine the card reader installation location [Figure 18].
2. Install the card reader to the end panel per card reader
manufacturer's installation instructions.
3. Route the card reader wiring through the access hole and
turnstile, and connect to your access control system.
Card reader wiring must be routed down through the access
hole.
NOTES
NOTE
Access
Hole
Card Reader Installation Location
Shown With and Without End Panel
Figure 18
