Keypad Mounting Options
Table Top Mounting
1. Insert batteries
into Keypad following polarity markings.
2. Route power cable
through wire window in table stand. Connect the power supply by
inserting the barrel plug into the black port. Orient the barrel plug as shown.
3. Insert the Keypad
into the table stand. Push any extra wire through the wire window before
inserting into stand. Slide the Keypad on stand until it "clicks" into place.
4. Coil up the excess power wire
into the stand. Insert wire into wire holder and close stand
cover to contain excess wires.
5. Plug in power supply.
Wire window
Wire holder
Barrel plug
