EN
Quick Install
KeypadRFID
www
.mobotix.com
HiRes Video Innovations
The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decen-
tralized concept has made high-resolution video systems cost-efficient.
MOBOTIX AG • D-67722 Langmeil • Phone: +49 6302 9816-103 • Fax: +49 6302 9816-190 • [email protected]
Security-Vision-Systems
MX-Keypad1-EXT
31.468-005_EN_08/2015
Keypad with Contactless
RFID Technology
Module for MOBOTIX IP Video Door Station
Keyless access to buildings using RFID transponder
card or PIN code
• Keypad module with 1 admin and 5 user RFID cards
• Mailbox control
• Integrated RFID technology for keyless entry
• Available colors: white, silver, dark gray, black, amber
• Up to 60 hrs backup power supply using DoorMaster
(accessory)
Click
1
2
Installing the KeypadRFID
Installing the module follows the procedure described in the
T24 System Manual
Part 1, in Section 2.4.2, "Installing the KeypadRFID". For more information on other
connection variants (e.g. without DoorMaster), please see
Section 2.1, "Overview:
Connection and Wiring Diagrams".
When installing the module in the frame, make sure that you insert the
right side
of the module first
and then press on the
left edge
(and not on the center) to
click the module into place.
Operation
After installing, make sure that you follow the steps in the
T24 System Manual Part 2 in Section 2, "Initial Operation
without PC". This chapter shows you how to configure the entire system (including the RFID admin and user cards)
in a few simple steps.
Replacing the KeypadRFID
If the KeypadRFID needs to be replaced against all expectations, you need a current backup of the system
configuration. This will ensure that you can seamlessly integrate the new KeypadRFID into the system later on.
Please follow the steps outlined in the
T24 System Manual Part 2 in Section 5.2, "Backup & Restore".
To dismount the KeypadRFID, follow the steps in the
T24 System Manual Part 1 in Section 2.4.6, "Removing and
Exchanging Modules". Make sure that you deactivate the theft protection before dismounting the module and
that you activate the theft protection again after re-installing.
MOBOTIX KeypadRFID
MX-Keypad1-EXT
(in triple frame silver)
RFID cards
for keyless entry included
(1 admin card, 5 user cards)
I/O terminal
Sealing plug
Seal
MxBus terminal
Back view with cover removed
Outdoor
Indoor
Door
2
6
MxBus (YSTY 0.8 mm – max. length: 50 m/55 yd)
Theft protection (YSTY 0.8 mm – max. length: 50 m/55 yd)
Door opener, door sensor, lock sensor
(YSTY 0.8 mm – max. length: 50 m/55 yd)
DoorMaster
IP Video Door Station
2
For additional information on the other connection variants and for installing,
see the
T24 System Manual Part 1 on
www.mobotix.com
> Support > Manuals
.
KeypadRFID
InfoModule
Standard Connection:
KeypadRFID with
IP Video Door Station, InfoModule and DoorMaster
Weatherproof (IP65)
–30 to +60
°C/–22 to +140
°F
