To check that the main wheel is
properly attached to the hub, remove
the finger from the central knob and
pull at the main wheel.
If the main wheel doesn’t lock, don’t
use the wheelchair but contact
your dealer.
Sand and sea water (salt used for
gritting in the winter) can damage
the bearings of the main wheels and
front castors. Clean the wheelchair
thoroughly after exposure.
6.3 froNT CASTorS
are equipped with quick release axle.
To take off
• Press the release button under the front
fork.
To mount
• Lead the quick release axle into the
bearing house. Pull the fork slightly to
ensure that the fork is fully locked.
6.4. SEAT HEIGHT
ADjUSTMENT
the seat height at the rear depends on:
• Size of main wheel.
• Position of main wheel.
6. assemBlY anD
aDJustment
for information about adapting the
wheelchair to the user, please see:
my-netti.com Knowledge center.
tools needed are described under each
chapter. accessories described in chapter 5 is
a presentation of options and will be delivered
with separate mounting descriptions.
6.1 UNPACKING
1. unpack all the parts, and check that
everything is there according to the
packing list.
2. mount the main wheels (chapter 6.2)
3. mount the front castors (chapter 6.3)
4. check and adjust the seat dept (chap. 6.7)
5. mount the back rest (chapter 6.5)
6. mount the arm supports ( cahpter 6.12)
7. mount the seat cushion (chapter 6.9)
8. mount the leg supports (chapter 6.10)
9. mount the head support (chapter 6.11)
10. mount any accessories (chapter 5).
Weight of components (450 mm chair width):
main wheels: 1,9 kg each
anti tip: 0,1 kg each
front castors: 0,8 kg each
leg support angle adj.: 2 kg each
seat cushion: app. 1 kg
Head support a: 1 kg
Head support c: 0,9 kg
6.2 MAIN WHEEL
to mount the main wheel remove the quick
release bolt from the hub bushing, lead it
through the
center of the
main wheel
and into the
hub bushing
while pressing
the knob in
center.
14
my-netti.com
Model:
NettI 4U CE PLUS and CES PLUS
Language:
English
Version:
2017-06
