Adjusting the head support in height:
• Release the locking lever on the head
support adapter (c).
• Adjust the head support and fix it in
required position.
Adjusting the head support in angle:
• Release the adjustment wheel at the rear
of the horizontal bar (B).
• Adjust the head support and fix it in
required position.
Adjusting the head support sideways:
• The head support adapter can be moved
both to the right and left, giving the
possibility to accommodate special needs
for head support.
• Untighten the four screws holding the
adapter together.
• Move the adapter to the required
position and fix the adapter by
tightening the screws diagonally.
remember to release the levers when
adjusting the head support.
If the head support stand does not fit
the bracket perfectly, the bracket is
probably fixed too tight or unevenly.
After fitting the head support fix it
properly by tightening the little set
screw in the centre on top of the
head support bracket using an Allen-
key.
If the head support seems to short in
height, it can be turned 80° by
releasing the adjustment wheel at the
rear of the horizontal bar (b) .
6.12 ArM SUPPorT
• The arm supports are removable,
height- and depth adjustable.
Please be aware while mounting that
there is a left-hand-side and a
right-hand-side arm support.
Mounting the arm support
• Grip the arm support and pull straight
up in a vertical direction from the insert
sleeve.
lock for the arm support can be
ordered as an accessory.
22
my-netti.com
Model:
NettI 4U CE PLUS and CES PLUS
Language:
English
Version:
2017-06
