10. maintenance
10.1 MAINTENANCE
INSTrUCTIoNS
the netti chairs are built of modules. alu
rehab carries stock of all parts and is
ready to supply these on short notice.
necessary instructions for mounting will
follow the parts.
Parts to be handled by user are defined
in spare part catalogues that can be
downloaded at www.my-netti.com. these
parts can, if needed, also be removed and
sent to manufacutrer/distributor upon
request.
Parts related to wheel frame construction
must be handled by manufacturer or
authorized sercvice facility.
If defects or damages occur,
please contact your dealer.
Check/re-adjust screws and nuts
at regular intervals.
Sand and sea water (salt used for
gritting in the winter) can damage
the bearings of the front castors
and main wheels. Clean the
wheelchair thouroughly after use.
you can order original paint from
Alu rehab to repair scratches and
minor damages to the paint:
Please contact your dealer to
order.
As a rule of thumb, use oil on
movable parts and all bearings. Alu
rehab recommends use of ordinary
bicycle oil.
b) each article has a minimum burst pres-
sure of 4 times the charge pressure at +20
degree celsius for products not exceeding
0,5 l gas space capacity.
c) each article is made of material that
will not fragment.
d) each article was manufactured in
accordance to quality standard which
is approved by the responsible national
authority
e) it is proven and shown that the article
relives its pressure by means of a fire
degradable seal or other pressure relief
device such that the article will not frag-
ment and the article does not rocket.
9.4 TrAVELLING oN PUbLIC
TrANSPorT
the wheelchair should be put in a special
area for wheelchairs. the wheelchair
should face opposite the direction of
travel. the back of the wheelchair must
be located against a fixed object such as
a row of seats or a partition. make sure
the user can easily reach any hand rails or
handles.
32
my-netti.com
Model:
NettI 4U CE PLUS and CES PLUS
Language:
English
Version:
2017-06
