6.7 SEAT DEPTH
ADjUSTMENT
• If the seat depth can only be adjusted at
the rear, loosen the locking bolt in the
plastic bracket.
• Find the required position for the locking
head in the plastic bracket, and remove
the plastic plug from this hole.
• Lock the back rest by pushing the locking
bolt through the plastic bracket and
the gas spring locking head.
• After changing the hole position in the
plastic bracket, the hole position in the
back rest hinge must be changed into the
parallel position.
Check that the hole in the back rest
hinge and the plastic bracket are
mounted into the same hole position.
6 mm Allen-key
6.8 ANTI-TIP
the anti-tips should be mounted according
to the mounting description which is
enclosed with the chair upon arrival.
use of the anti-tip
• Pull the anti-tip out
• Turn it up or down 180°.
• Lock it in position
6.6 bACKrEST CUSHIoNS
Backrest cushions are fixed and adjusted
onto the wheelchair using the Velcro.
the backrest comes with a one piece
Velcro back as standard.
Backrest cushions are attached with a
Velcro system.
It is imperative to correctly set-up
the cushion in order to ensure good
seating comfort
The cushion covers are washable and
thereby reusable. follow the
instruction on the back of the
cushion for correct maintenance and
washing of the cushion.
my-netti.com
17
Model:
NettI 4U CE PLUS and CES PLUS
Language:
English
Version:
2017-06
