manualshive.com logo in svg

Altusen KN9108: KN9116, User Manual, Page: 9 / 132

Share
Download
Altusen KN9108: KN9116 User Manual Download Page 9

KN9108 / KN9116 User Manual

ix

About This Manual

This User Manual is provided to help you get the most from your CC1000 
system. It covers all aspects of installation, configuration and operation. An 
overview of the information found in the manual is provided below.

Overview

Chapter 1, Introduction, 

introduces you to the KN9108 / KN9116 System. 

Its purpose, features and benefits are presented, and its front and back panel 
components are described.

Chapter 2, Hardware Setup, 

provides step-by-step instructions for setting 

up your installation, and explains some basic operation procedures.

Chapter 3, Administration, 

explains the administrative procedures that are 

employed to configure the KN9108 / KN9116’s working environment, as well 
as how to operate the KN9108 / KN9116 from the local console.

Chapter 4, Browser Operation, 

describes how to log into the KN9108 / 

KN9116 with your browser, and explains the functions of the icons and buttons 
on the KN9108 / KN9116 web page.

Chapter 5, The Windows Client, 

explains how to connect to the KN9108 

/ KN9116 with the Windows Client software, and describes how to use the 
OSD to access and control the computers connected to the switch.

Chapter 6, The Java Client, 

describes how to connect to the KN9108 / 

KN9116 with the Java Client software, and explains how to use the OSD to 
access and control the computers connected to the switch.

Chapter 7, The Log File, 

shows how to use the log file utility to view all the 

events that take place on the KN9108 / KN9116.

Chapter 8, The Log Server, 

explains how to install and configure the Log 

Server.

Chapter 9, AP Operation, 

describes how to operate the KN9108 / KN9116 

using Windows and Java Client application programs, rather than with the 
browser method.

An Appendix, 

at the end of the manual provides technical and 

troubleshooting information.

kn9108_9116_2007-09.book  Page ix  Friday, September 21, 2007  10:39 AM

Summary of Contents for KN9108: KN9116





































































































































Reviews:

No comments