49
Chapter 5
The Windows Client
Activating the Browser OSD
After you have successfully logged in (see
browser-based Windows Client OSD do the following:
1. Click the
Windows Client
button (the one without the arrow) at the left of
the web page.
Note:
1. You must have DirectX 7.0 or higher installed on your computer.
If not, the Windows Client will not load. If you don't already have
it, DirectX is available for free download from Microsoft's
website: http://www.microsoft.com/downloads.
2. The Windows Client button with the arrow is for running the AP
version of the Windows Client (see Chapter 9,
, for
details).
2. When the file download security warning dialog box appears, click
Run
.
3. If a second security warning dialog box appears, click
Run
again.
Note:
1. If the browser cannot run the file, save it to disk, instead. Then,
with your browser still open to the KN9108 / KN9116 web page,
run the file from your disk.
2. If you use the
save to disk
method, for security purposes, you
cannot simply run a previously downloaded version of the
program. Each time you want to access the KN9108 / KN9116,
you must log in to the web page with a valid username and
password to download a fresh copy of the program.
(Continues on next page.)
kn9108_9116_2007-09.book Page 49 Friday, September 21, 2007 10:39 AM
