KN9108 / KN9116 User Manual
94
The File Menu
The
File Menu
allows the operator to Create, Save, and Open user created
Work files. A Work File consists of all the information specified in a Client
session. This includes the Server List and Server IP list items, as well as the
Hotkey settings.
Whenever a user runs the Client program, it opens with the values contained in
the
current work file
. The current work file consists of the values that were in
effect the last time the program was closed.
The File menu consists of three items, as follows:
The Tools Menu
Tools menu operations are performed after you connect, but before you switch
to remote view. There are two entries on the Tools Menu: Keyboard and
Config. They are explained in the sections that follow.
Keyboard
Various configuration actions related to the keyboard, video, and mouse can be
performed via hotkey combinations. The Hotkey Setup utility is accessed by
opening the
Tools
menu and selecting
Keyboard
. The Hotkey Setup Screen
appears:
This is essentially the same dialog box discussed in the browser-based
Windows Client
chapter. See
, page 61, for details.
New
Allows the user to create a named work file so its values will not
be lost, and it will be available for future recall.
Open
Allows the user to open a previously saved work file and use the
values contained in it.
Save
Allows the user to save the values presently in effect as the
current work file
.
kn9108_9116_2007-09.book Page 94 Friday, September 21, 2007 10:39 AM
