Altusen Hideaway KL3116, User Manual

Page: 63 / 90

Chapter 5. Hotkey Operation
49
Auto Scan Mode
The KL3116's Auto Scan feature automatically switches among all the active
KVM Ports that are accessible to the currently logged on User at regular
intervals (see
SCAN/SKIP MODE , page 37) so that the user can monitor their
activity automatically.
To start Auto Scanning, key in the following Hotkey combination:
1. Invoke HKM (see page 47)
2. Key in [A]
After you press A , you automatically exit Hotkey Mode, and enter Auto
Scan Mode.
3. To exit Auto Scan Mode, press [Esc] or [Spacebar]; or right-click with the
mouse.
Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended—only Auto Scan Mode compliant keystrokes
and mouse clicks can be input. You must exit Auto Scan Mode in order
to regain normal control of the console.
While you are in Auto Scan Mode, you can pause the scanning in order to keep
the focus on a particular computer by pressing
P , or with a left-click of the
mouse.
During the time that Auto Scanning is paused, the Command Line displays:
Auto Scan: Paused.
Pausing when you want to keep the focus on a particular computer is more
convenient than Exiting Auto Scan Mode because when you Resume scanning,
you start from where you left off. If, on the other hand, you Exited and
restarted, Scanning would start over from the very first computer on the
installation.
After pausing, to resume Auto Scanning, press any key. Scanning continues
from where it left off.
kl3116.book Page 49 Friday, July 7, 2006 11:54 AM