Altusen Hideaway KL3116 User Manual Download Page 13 | Manualshive

Page: 13 / 90

background image

KL3116 User Manual

xiii

ALTUSEN Information

Technical Support

Getting Help

For additional help, advice, and information, ALTUSEN provides several
support options. If you need to contact ALTUSEN technical support with a
problem, please have the following information ready beforehand:

Product model number, serial number, and date of purchase.

Your computer configuration, including operating system, revision level,
expansion cards, and software.

Any error messages displayed at the time the error occurred.

The sequence of operations that led up to the error.

Any other information you feel may be of help

North America Technical
Phone Support

Registered ALTUSEN product owners are entitled to
telephone technical support. Call the ALTUSEN
Technical Support Center: 949-453-8885.

International Technical
Phone Support

1. Contact your local dealer.
2. Call the ALTUSEN Technical Support Cen-

ter:(886-2) 8692-6959.

Email Support

E-mail your questions and concerns to:
[email protected]

Online Support

Troubleshooting

Documentation

Software Updates

Online troubleshooting that describes the most com-
monly encountered problems and offers possible
solutions to them; online documentation (including
electronically available manuals); and the latest driv-
ers and firmware for your product are available at the
ALTUSEN website:

http://www.altusen.com

kl3116.book Page xiii Friday, July 7, 2006 11:54 AM

«
...
11
12
13
14
15
...
»

Summary of Contents for Hideaway KL3116



























































































Reviews:

No comments

Related manuals for Hideaway KL3116

Brand: Panduit Pages: 4

F1DC100S - 15" LCD Rack Console

Brand: Belkin Pages: 10

Brand: IDTECH Pages: 9

Brand: Royal Catering Pages: 21

Brand: ViewSonic Pages: 25

Brand: I-Tech Pages: 2

Brand: Electrolux Pages: 12

Brand: Electrolux Pages: 7

Microwave Drawer SMD2489ES

Brand: Sharp Pages: 28

Brand: Sharp Pages: 52

Brand: POSMicro Pages: 2

FR-1002-17W-FHD

Brand: stealth.com Pages: 21

Brand: Bull Pages: 10

Brand: Avenview Pages: 22

Rackmount Keyboard Drawer RSUN-N17

Brand: Avenview Pages: 23

Brand: Avenview Pages: 75

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands