Vertiline33D/VertiLine33TD/Vertiline63D/VertiLine63TD
- 7 -
Chassis Mounting Options:
Fig. 3
Wall Mount Installation
1. Attach mounting brackets (A) on the left and right side of rack chassis using
two (2) flat head screws (B) (included) (Fig. 4a).
2. Secure unit to wall with appropriate screws/hardware (not included) (Fig. 4b).
Caution: It is necessary to make sure mounting screws are securely fastened to a beam when installing.
Rack Mount Installation
1. Remove factory installed screws from both sides of rack chassis (Fig. 3a).
2. Attach mounting brackets (A) on the left and right side of rack chassis using the
two (2) flat head screws (B) (included) (Fig. 3b).
3. Install unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 3c).
Fig. 5
Fig. 4
Shelf Installation
1. Position and affix rubber pads (C) (included) at each
corner on the bottom of the unit (Fig. 5).
2. Place unit in desired location.
B
A
C
Hardware
(Included)
:
A
B
Fig. 4b
Fig. 4a
C
A
B
Fig. 3b
Fig. 3a
Fig. 3c
Top
Top
Top
Front
Left
Front
Left
Front Left
Left Side
Rubber Pad
Two (2) mounting brackets
Six (6) flat head screws
for mounting brackets.
Four (4) rubber pads.
Remove
